SEW-Eurodrive FSE24B EtherCAT Скачать руководство пользователя страница 35

Страница: 35 / 52

Manual – MOVITRAC® B Communication Interface FSE24B EtherCAT®

Communication via EtherCAT

Operating MOVITOOLS

MotionStudio via EtherCAT

7.4

Communication via EtherCAT

7.4.1

Overview

EtherCAT

provides the user with acyclic parameter services in addition to cyclic pro-

cess data. This acyclic data exchange takes place via the mailbox gateway of the
EtherCAT

master.

The parameter services of MOVITOOLS

MotionStudio are integrated into the

EtherCAT

telegrams via the mailbox gateway in the EtherCAT

master. The feedback

of the drives is transferred by the EtherCAT

slave in the same way to the mailbox gate-

way and further to MOVITOOLS

MotionStudio.

The following cases must be distinguished for the installation of the mailbox gateway
and MOVITOOLS

MotionStudio:

• Case 1: Installation on the same unit (page 36)

– The EtherCAT

master and MOVITOOLS

MotionStudio run on

the same

unit.

No additional hardware required.

• Case 2: Installation on different units (without SEW controller) (page 37)

– The EtherCAT

master and MOVITOOLS

MotionStudio run on

different

units.

This is the case if no suitable (Windows-based) operating system is available or
MOVITOOLS

MotionStudio is to be run on a separate PC. The EtherCAT

mas-

ter needs a second Ethernet interface that is connected to the engineering PC on
which MOVITOOLS

MotionStudio is running.

• Case 3: Installation on different units (with SEW controller as EtherCAT

master)

– The network topology is identical to case 2. If you use an SEW controller, you

merely have to set the engineering access in MOVITOOLS

MotionStudio ac-

cordingly. The routing via the mailbox gateway and the EtherCAT

communica-

tion with downstream drives is performed automatically.

You can use PROFIBUS or Ethernet (SMLP not EtherCAT

) as engineering ac-

cess to the SEW controller. For detailed information, refer to the documentation
of the SEW controllers.

INFORMATION

Unassigned EtherCAT

interfaces of an EtherCAT

slave must not be used for engi-

neering purposes.
• Use only the EtherCAT

master interface intended for engineering for this purpose.

Содержание FSE24B EtherCAT





















































Результаты поиска

Содержание FSE24B EtherCAT

Отзывы:

Похожие инструкции для FSE24B EtherCAT

Бренды по названию

Популярные бренды

SEW-Eurodrive FSE24B EtherCAT, Руководство пользователя

Результаты поиска

Содержание FSE24B EtherCAT

Отзывы:

Похожие инструкции для FSE24B EtherCAT

Бренды по названию

Популярные бренды