SEW-Eurodrive FSE24B EtherCAT, Руководство пользователя

Страница: 10 / 52

10
Manual – MOVITRAC® B Communication Interface FSE24B EtherCAT®
4
Installation of the FSE24B communication option
Assembly and Installation Notes
4 Assembly and Installation Notes
4.1 Installation of the FSE24B communication option
INFORMATION
• MOVITRAC
®
B does not need a certain firmware status if you only want to use pro-
cess data objects with 3 process data words.
The MOVITRAC
®
firmware 18225632.11 is required if
– 10 process data words are to be transmitted to and from MOVITRAC
®
B
– Advanced diagnostics via parameter group 09_ (bus diagnostics) is to be used
• Always attach the front module to the unit with the screw that is included in the de-
livery. For size 0, mount the spacer bolt first. The bolt is already installed in sizes 1
and higher. The screw establishes a high-frequency EMC connection between the
basic unit and the front module.
• The FSE24B communication option cannot be used together with other communi-
cation options (FSC) or I/O expansions (FIO) in MOVITRAC
®
B.
• When using the FSE24B communication option, one additional diagnostic interface
(RS485) is available.
• The system bus (CAN) of MOVITRAC
®
B is used for an internal connection to the
FSE24B front module, which means it is no longer available for other functions.
• The FSE24B can be supplied with DC 24 V via the X47 connector, so that the bus
is still operational even when MOVITRAC
®
is switched off or the FSE24B commu-
nication option is unplugged. MOVITRAC
®
B is also supplied with power.
• If the FSE24B communication option is only supplied with power by MOVITRAC
®
B, the voltage supply must not be deactivated via parameter P808 Auxiliary voltage
output VIO24 .
• If the communication option FSE24B is supplied only via MOVITRAC
®
B, resetting
an inverter error may cause the communication unit to perform a reset as well,
which briefly interrupts the EtherCAT
®
line. In order to prevent the brief interruption
of the EtherCAT
®
line, the FSE24B must be supplied with DC 24 V via X47.