SEW-Eurodrive EDR200, Руководство по эксплуатации, Страница: 20 / 272

3
Motor structure
Basic structure of EDR..250 – 280, EDRN250 – 280 motors
Operating Instructions – EDR..71 – 315, EDRN63 – 315
20
3.5 Basic structure of EDR..250 – 280, EDRN250 – 280 motors
The following figure shows an example of the basic structure of EDR..250 – 280,
EDRN250 – 280 motors with anti-twist frame:
[115]
[114]
[113]
[111]
[112]
[122]
[119]
[131]
[124]
[123]
[132]
[219]
[117]
[118]
[116]
[128]
[140]
[139]
[1453]
[162]
[161]
[129]
[134]
[159]
[160]
[1457]
[15]
[143]
[144]
[9]
[42] [19]
[26]
[25]
[30]
[35]
[22]
[24]
[108]
[109]
[705] [715]
[706]
[707]
[105]
[100]
[103]
[7]
[106]
[107]
[90]
[93]
[94]
[16]
[2]
[11]
[3]
[1]
[31]
[44]
[43]
[40]
[36]
[32]
[21]
14397384075
[1] Rotor [35] Fan guard [111] Gasket for lower part [134] Screw plug
[2] Retaining ring [36] Fan [112] Terminal box lower part [139] Hex head screw
[3] Key [40] Retaining ring [113] Cap screw [140] Washer
[7] Flange [42] B-side endshield [114] Tooth lock washer [143] Adapter plate
[9] Screw plug [43] Supporting ring [1213] Kit
1)
[144] Cap screw
[11] Deep groove ball bearing [44] Deep groove ball bearing [116] Serrated lock washer [159] Connection piece
[15] Cap screw [90] Foot [117] Stud [160] Connection piece seal
[16] Stator [93] Washer [118] Washer [161] Hex head screw
[19] Cap screw [94] Cap screw [119] Cap screw [162] Tooth lock washer
[21] Oil seal flange [100] Hex nut [122] Tooth lock washer [219] Hex nut
[22] Hex head screw [103] Stud [123] Hex head screw [705] Canopy
[24] Lifting eyebolt [105] Compression spring [124] Tooth lock washer [706] Spacer bolt
[25] Cap screw [106] Oil seal [128] Serrated lock washer [707] Hex head screw
[26] Shield ring [107] Oil flinger [129] Screw plug [715] Hex head screw
[30] Oil seal [108] Nameplate [131] Gasket for cover [1457] Set screw
[31] Key [109] Grooved pin [132] Terminal box cover [1453] Screw plug
[32] Retaining ring
1) 1 anti-twist frame, 1 terminal board, 4 sleeves, 2 screws, 2 nuts
25896334/EN – 06/2019