SEW-Eurodrive EDR200, Руководство по эксплуатации, Страница: 19 / 272

3
Motor structure
Basic structure of EDR..200 – 225, EDRN200 – 225 motors
Operating Instructions – EDR..71 – 315, EDRN63 – 315
19
3.4 Basic structure of EDR..200 – 225, EDRN200 – 225 motors
The following figure shows an example of the basic structure of EDR..200 – 225,
EDRN200 – 225 motors with anti-twist frame:
[390]
[123]
[124]
[132]
[131 ]
[122]
[1213]
[119]
[112]
[111]
[129]
[219]
[118]
[116]
[117]
[128] [140]
[139]
[134]
[109]
[108]
[16]
[105]
[9]
[7]
[107]
[106]
[103]
[100]
[93]
[93]
[90]
[24]
[42] [22]
[19]
[26]
[25]
[30]
[35]
[715]
[706]
[707]
[705]
[2]
[11]
[3]
[1]
[31]
[21]
[44]
[43]
[40]
[36] [32]
9007202310009099
[1] Rotor [31] Key [107] Oil flinger [131] Seal for cover
[2] Retaining ring [32] Retaining ring [108] Nameplate [132] Terminal box cover
[3] Key [35] Fan guard [109] Grooved pin [132] Terminal box cover
[7] Flange [36] Fan [111] Seal for lower part [134] Screw plug
[9] Screw plug [40] Retaining ring [112] Terminal box lower part [139] Hex head screw
[11] Deep groove ball bearing [42] Rear endshield [116] Serrated lock washer [140] Washer
[15] Cap screw [43] Supporting ring [117] Stud [390] O-ring
[16] Stator [44] Deep groove ball bearing [118] Washer [219] Hex nut
[19] Cap screw [90] Foot [119] Cap screw [705] Canopy
[21] Oil seal flange [93] Washer [122] Tooth lock washer [706] Spacer bolt
[22] Hex head screw [94] Cap screw [123] Hex head screw [707] Hex head screw
[24] Lifting eyebolt [100] Hex nut [124] Tooth lock washer [715] Hex head screw
[25] Cap screw [103] Stud [128] Serrated lock washer [1213] Kit
1)
[26] Shield ring [105] Cup spring [129] Screw plug
[30] Oil seal [106] Oil seal [131] Seal for cover
1) 1 anti-twist frame, 1 terminal board, 4 sleeves, 2 screws, 2 nuts
25896334/EN – 06/2019