SEW-Eurodrive EDR200, Руководство по эксплуатации, Страница: 18 / 272

3
Motor structure
Basic structure of EDR..160 – 180, EDRN132M – 180 motors
Operating Instructions – EDR..71 – 315, EDRN63 – 315
18
3.3 Basic structure of EDR..160 – 180, EDRN132M – 180 motors
The following figure shows an example of the basic structure of EDR..160 – 180,
EDRN132M – 180 motors with anti-twist frame:
[123]
[124]
[132]
[131 ]
[122]
[1213]
[119]
[112]
[111]
[107]
[2]
[10]
[11]
[31]
[41]
[44]
[36]
[32]
[3]
[1]
[104]
[103]
[90]
[94]
[24]
[22]
[42]
[19]
[30]
[30]
[715]
[705]
[706]
[707]
[108]
[109]
[17]
[93]
[14]
[15]
[100]
[106]
[7]
[12]
[9]
[16]
[219]
[118]
[116]
[117]
[129 ]
[134]
[128]
[262]
[616]
[137]
[140]
[139]
[390]
9007202221938571
[1] Rotor [30] Sealing ring [106] Oil seal [131] Seal for cover
[2] Retaining ring [31] Key [107] Oil flinger [132] Terminal box cover
[3] Key [32] Retaining ring [108] Nameplate [134] Screw plug
[7] Flange [35] Fan guard [109] Grooved pin [139] Hex head screw
[9] Screw plug [36] Fan [111] Seal for lower part [140] Washer
[10] Retaining ring [41] Cup spring [112] Terminal box lower part [390] O-ring
[11] Deep groove ball bearing [42] Rear endshield [116] Serrated lock washer [219] Hex nut
[12] Retaining ring [44] Deep groove ball bearing [117] Stud [705] Canopy
[14] Washer [90] Foot [118] Washer [706] Spacer
[15] Hex head screw [91] Hex nut [119] Cap screw [707] Hex head screw
[16] Stator [93] Washer [122] Tooth lock washer [715] Hex head screw
[17] Hex nut [94] Cap screw [123] Hex head screw [1213] Kit
1)
[19] Cap screw [100] Hex nut [124] Tooth lock washer
[22] Hex head screw [103] Stud [128] Serrated lock washer
[24] Lifting eyebolt [104] Supporting ring [129] Screw plug
1) 1 anti-twist frame, 1 terminal board, 4 sleeves, 2 screws, 2 nuts
25896334/EN – 06/2019