8
Technical data
Technical data of the ECC-DBC binary control
Operating instructions – ECDriveS
®
34
8.3
Technical data of the ECC-DBC binary control
Connection voltage
DC 24 V +15%/-25%
Voltage range on control
input
DC 14 ‑ 30 V
Current consumption
≈ 30 mA without motor roller
Integrated
current limiting
Max. peak current
16 A
Max. starting current
4 A
Max. nominal current
3 A
Input fuse
8 A
Max. current error output
100 mA (only P versions)
50 mA (only P versions)
Error output
Short circuit protection
150 mA (only P versions)
Supported motor rollers
ECR roller drives max. 120% overload
ECG gearmotors max. 120% overload
PWM frequency
20 kHz
Time delay
Initialization
≤ 20 ms at start
Time delay to startup of the
motor
≤ 5 ms
Operating temperature
0 °C – 50 °C
Storage temperature
-40 °C – 85 °C
Degree of protection
IP20
for indoor use only
Altitude up to 1000 m
Maximum relative humidity: 70% for temperatures up to
30 °C, linearly decreasing to 50% for 50 °C
Environmental class 2
Mass
ca. 60 g
28507088/EN – 11/2018
