7
Inspection/maintenance
Storage
Operating instructions – ECDriveS
®
31
7
Inspection/maintenance
WARNING
Risk of crushing if the drive starts up unintentionally.
Severe or fatal injuries.
•
Before you start working on the unit, disconnect the motor and all connected op-
tions from the power supply.
•
Secure the motor against unintended power-up.
CAUTION
The surfaces on the drive can be very hot during operation.
Risk of burns.
•
Let the motor cool down sufficiently before you start working on it.
If necessary, all components of the ECDriveS
®
system are replaced. It is not planned
to have the components repaired.
7.1
Storage
•
Never store the roller motor / gearmotor and the modules of the control in the
open.
•
Store the roller motor / gearmotor and the modules of the control in a temperature
range of -30 °C to +70 °C and a relative humidity of 10% to 90% (non-condens-
ing).
28507088/EN – 11/2018
