SEW-Eurodrive DH 21B Series Скачать руководство пользователя страница 61

Страница: 61 / 92

Project planning and startup with MOVITOOLS

MotionStudio

Executing functions with the units

Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

5. Expand the parameter tree to the node you require.

9007200201958155

6. To display a specific group of device parameters, double-click on the group.

7. Press the enter key to finalize any changes you make to numerical values in the

input fields.

INFORMATION

For detailed information about the unit parameters, refer to the parameter list for the
unit.

7.6.2

Starting up units (online)

Proceed as follows:

1. Switch to the network view.

2. Switch to online mode by using the icon [1].

[1]

18014399693512203

3. Select the unit you want to startup.

4. Choose the command [Startup] > [Startup] from the context menu.

The startup assistant is displayed.

5. Follow the instructions of the startup wizard and then load the startup data into

your unit.

22900055/EN – 08/2016

Содержание DH 21B Series





























































































Результаты поиска

Содержание DH 21B Series

Отзывы:

SEW-Eurodrive DH 21B Series, Руководство пользователя, Страница: 61 / 92

Результаты поиска

Содержание DH 21B Series

Отзывы: