manualshive.com logo in svg

SEW-Eurodrive DH 21B Series, Руководство пользователя, Страница: 45 / 92

Поделиться
Скачать
SEW-Eurodrive DH 21B Series Скачать руководство пользователя страница 45

7

Project planning and startup with MOVITOOLS

®

 MotionStudio

First steps

Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

45

7.2

First steps

7.2.1

Starting the software and creating a project

Proceed as follows:

1. Select  the  following  item  from  the  Windows  start  menu:  [Start]  /  [Pro-

grams] / [SEW] / [MOVITOOLS MotionStudio] / [MOVITOOLS MotionStudio]

ð

MOVITOOLS

®

 MotionStudio is started.

2. Create a project with a name and directory.

7.2.2

Establishing communication and scanning the network

Proceed as follows:

1. Click "Configure communication channels" [1] in the toolbar.

[1]

18014399642823819

ð

The following window opens.

9007217492118283

2. From the drop-down list [1], select the communication type.

3. Activate the selected communication type [2].

4. To edit the settings of the selected communication type, click the button [3].

22900055/EN – 08/2016

Содержание DH 21B Series





























































































Отзывы:

Нет отзывов