SEW-Eurodrive DFE32B PROFINET IO, Руководство пользователя

Страница: 65 / 132

Manual – DFE32B Fieldbus Interface PROFINET IO
65
6
PROFINET configuration with topology detection
Operating Behavior in Conjunction with PROFINET
6.8.3 Specifying the topology and detecting faulty connections
Topology detec-
tion via topology
editor The topology detection is to compare the current topology (online topology) with the to-
pology from the project planning (offline topology). Any deviations suggest faulty con-
nections in the PROFINET network.
The following section provides an introduction as to how to use the topology editor to
specify PROFINET nodes and detect faulty connections to ports.
Refer to the online help for a detailed description and important additional information
(e.g. the color code of the comparison results).
Click [Help] to open the online help in the open topology editor.
Specifying the
topology Proceed as follows to specify the topology of nodes in a PROFINET network:
1. Start the topology editor according to section "Creating a PROFINET project and
starting the topology editor".
2. Select the "Offline/online comparison" tab.
3. Click [Start] [2] to determine the online topology and compare it with the topology
from project planning (offline topology).
The left part of the window displays the "Configured topology (offline)" list [1] and the
right part displays the "Detected topology (online)" list [4].
The color code (the online help) and the order of the entries provide information re-
garding the comparison result.
4. Make sure that the assignment corresponds to your requirements and is applied to
the project planning.
• If required, change the assignment of the devices. Mark the respective device in
both lists and click [Assign] [5].
67798AEN
[1] "Offline topology" list
[2] [Start] button
[3] Plus/minus symbol
[4] "Online topology" list
[5] [Assign] button
[2]
[5]
[4]
[1]
[3]
0 0
I