SEW-Eurodrive 18982093, Руководство по эксплуатации

Страница: 8 / 36

2
Safety notes
Preliminary information
Operating Instructions – MOVI4R-U
®
Frequency Inverter Module
8
2 Safety notes
2.1 Preliminary information
The following general safety notes serve the purpose of preventing injury to persons
and damage to property. They primarily apply to the use of products described in this
documentation. If you use additional components, also observe the relevant warning
and safety notes.
2.2 Target group
The product is intended for persons in training facilities that are equipped with the ap-
propriate furnishings in classrooms and laboratories. Furnishings are, for example, ex-
perimental stands, laboratory benches, energy cells, control panels and control con-
soles as well as control cabinets with pick-up positions for electrical energy.
The focus is on the transfer of knowledge to non-specialists. Before using the
products, non-specialists must be instructed about the safety-relevant aspects des-
cribed in this document.
Specialist for me-
chanical work Any mechanical work on the products must be carried out by a qualified specialist.
Specialists in the context of this documentation are persons familiar with the design,
mechanical installation, troubleshooting, and maintenance of the product who possess
the following qualifications:
• Qualification in the field of mechanical engineering in accordance with the national
regulations.
• They are familiar with this documentation.
Specialist for elec-
trotechnical work Any electrical work on the products must be carried out by adequately qualified electri-
cians. Qualified electricians in the context of this documentation are persons familiar
with electrical installation, startup, troubleshooting, and maintenance of the product
who possess the following qualifications:
• Qualification in the field of electrical engineering in accordance with the national
regulations.
• They are familiar with this documentation.
Additional qualifi-
cation In addition to that, these persons must be familiar with the valid safety regulations and
laws, as well as with the requirements of the standards, directives, and laws specified
in this documentation. The persons must have the express authorization of the com-
pany to operate, program, parameterize, label, and ground units, systems, and circuits
in accordance with the standards of safety technology.
Instructed persons All work in the areas of transportation, storage, operation and waste disposal must be
carried out by persons who are trained appropriately. The purpose of the instruction is
that the persons are capable of performing the required tasks and work steps in a safe
and correct manner.
2.3 Designated use
The product is designed for training purposes only. Operating the product in private,
craft, trade or for industrial purposes is not permitted. The product is not intended for
installation in electrical plants or machines. The product is not intended for use in ap-
plications (such as lifting applications).
The product can be used for operating AC asynchronous motors with squirrel-cage ro-
tors. The product is not suited for operating AC synchronous motors.
28520688/EN – 12/2018