SEVERIN CP 3544, Инструкция по эксплуатации

Страница: 11 / 72

104 x 142 mm
11
or mental capabilities, or
lacking experience and
knowledge, if they have
been given supervision or
instruction concerning the
use of the appliance and
fully understand all dangers
and safety precautions
involved.
∙ Children must not be
permitted to play with the
appliance.
∙ Caution: Keep any packaging materials
well away from children – these are
a potential source of danger, e.g. of
suffocation.
∙ Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any faults or defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull
the power cord, it must no longer be
used: even invisible damage may have
adverse effects on the operational safety
of the appliance.
∙ Do not allow the appliance or its power
cord to touch hot surfaces or to come
into contact with any heat sources.
∙ When removing the plug from the wall
socket, never pull on the power cord. Do
not let the power cord hang free.
∙ Do not use the appliance with any
attachments other than those provided
by the manufacturer.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Before first use
∙ Unpack the appliance and remove all
packaging material and any advertising
stickers from the appliance. The
nameplate must not be removed.
∙ Clean the appliance before using it for
the first time (see ‘Cleaning and care’).
Assembling the appliance
∙ Assemble the pulp sieve first:
Place the upper piece of the sieve onto
the lower piece. The pin on the lower
piece must be inserted into the groove
on the upper piece.
Insert the assembly knob through the
hole in the middle of the sieves. Ensure
that the locking hooks on the sieve
are in the small openings on the
assembly knob! Turn the sieve over
and place the assembly ring on the
underside of the assembly knob. Lock
in clockwise.
∙ Fit the drive shaft to the main unit.
∙ Place the juice container on the main
unit over the drive shaft.
∙ Place the assembled pulp sieve on the
juice container.
∙ Insert the small dome attachment into
the pulp sieve
∙ For large citrus fruits such as oranges,
the large dome attachment can be
inserted on top of the small dome