SK-A7C2
Warnings
Components:
Features:
Limited One-year Warranty
Sevenoak provides a limited warranty that this product
is free from defects in materials and workmanship to
the original purchaser under normal use for a period of
one (1) year from the original purchase date or thirty
(30) days after replacement (the “Warranty Period”),
whichever occurs later. Our responsibility with respect
to this limited warranty shall be limited solely to repair
or replacement, at its option, of any product which fails
during normal consumer use.
To obtain warranty coverage during the Warranty
period, contact your place of purchase (”Seller”) to
obtain a return merchandise authorization (”RMA”)
number, and return to Seller the defective product
along with proof of purchase and the RMA number.
This warranty does not extend to damage or failure
which results from misuse, neglect, accident,
alternation, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN,
SEVENOAK MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific
legal rights, and you may also have additional rights
which vary from state to state.
1. Top hand grip
2. Top hand grip connector
3. Main body
4. 1/4” camera locking screw
5. Quick release plate
6. HDMI plug protector
7. Micro HDMI adapter cable
8. Base plate
9. 2*15mm standard rods
10. M4 Screws
11. Allen Key
■
Form-fitting cage
■
Aluminum construction
■
Comfortable wood grip
■
Removable top hand grip
■
Quick release plate
■
Built in 1/4” and 3/8” mounting points
■
Built in cold shoes
■
A pair of 15mm standard rods
■
Full access to camera’s controls, buttons, memory slot
and battery
■
Can use together with battery grip and sony microphone
Cage Kit for Sony A7, A7S, A7R, A7 II
，
A7S II
，
A7R II
SK-A7C2 is a portable aluminum cage kit built for the
Sony A7, A7S, A7R, A7 II, A7S II, A7R II which adds
protection, stability and mounting options to the
camera. It includes form fitting camera cage, wood grip,
top hand grip, micro HDMI adapter cable, HDMI plug
protector, quick release base plate, cold shoes, 1/4” and
3/8” mounting points etc. The form fitting camera cage
allows full access to the camera’s controls, buttons,
battery and SD card slot. The cold shoes, 1/4” and 3/8”
mounting points allows you to mount different
accessories.
The HDMI plug protector frees you from worrying about
wearing out or damaging the micro HDMI port by
repeatedly plugging or replugging a micro HDMI cable
into your camera body. It also helps to prevent your
HDMI cable from accidentally coming unplugged during
a shoot which is particularly important when using an
external monitor or recorder.
The comfortable wood grip and removable top hand
grip enable users to switch from one to the other easily
for different shooting requirement. The built in 1/4” and
3/8” mounting points as well as two cold shoes on the
top hand grip enables users to mount various kinds of
useful accessories.
The cage also comes with quick release base plate and a
pair of 15mm standard rods that allows you to remove
and remount the camera from the rods easily and
quickly. With 1/4” and 3/8” mounting points on the
quick release plate, the cage can be easily mounted
onto or removed from a tripod, rig or other device.
■
Please read and follow these instructions, and keep
this manual in a safe place.
■
Handle the unit with care.
■
Clean the unit with a soft, dry cloth.
■
Use only parts provided by the manufacturer.
■
Make sure everything is secure before proceeding.
■
Make sure the item is intact and that there are no
missing parts.
■
Do not exceed the maximum load capacity.
■
All photos are for illustrative purposes only.
换图
换
图
换图
