21
If the product is not working properly, please check the following troubleshooting hints before you contact customer service:
Symptoms
Possible Solution
Blank screen
Check the status LED. If the status LED is red, the Outdoor Television is in standby and the monitor is black, this is
normal. If the status LED is blue and the monitor is black, the Outdoor Television might perform an input scan with no
available signal. Please check if an input source is available and that the port of the device has been connected correctly
in the Service Settings/ Input Ports menu. Press “Menu” on your remote control: you should see the OSD menu. Check
your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Outdoor
Television to its default settings. If the problem still exists contact customer service.
Color defects
Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.
The image is
unsatisfactory
Adjust the picture characteristics as described in the above-mentioned section “Video Settings”. Image is not stable
Check that the display resolution and frequency from your media source is compatible with the Outdoor Television.
Error message:
“No Signal”
Check that the connected media sources are switched on. Check that the signal cable connector is properly connected
and that the connection pins are not bent or damaged. Press “Menu” on your remote control: you should see the OSD
menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore
the Outdoor Television to its default settings. If the problem still exists contact customer service.
Low or no sound
Press “Volume Up” and/or “Volume Down” on your remote control and check the audio connection cable(s). Make sure
that the Volume Limit setting in the Service Settings menu has been set to an audible value.
Remote control
doesn’t work
Replace the batteries of the remote control.
If you need further assistance, please contact Séura at [email protected] or call 1-800-957-3872 weekdays 8:00 am - 4:30 pm CST.
Features
42"
47"
55"
Display Backlight
TFT Thin Film Transistor | LED Backlight
Active Screen Area W x H
36.62" x 20.6"
40.93" x 23.0"
47.62" x 26.79"
Diagonal
42"
47"
55"
Picture Format
16:9
16:9
16:9
Physical Resolution
1920 x 1080
1920 x 1080
1920 x 1080
Viewing Angle
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Brightness
700 cd/m2
700 cd/m2
700 cd/m2
Contrast
Typical 4000:1
Typical 4000:1
Typical 5000:1
Response Time
8ms
6.5ms
6ms
Power Consumption
TBD
TBD
TBD
Operating
Temperature
-30° to 140° Fahrenheit
Humidity
20 - 80% RH, Non-Condensing
Certification
FCC, MET
NOTE: Above specification may be changed without prior notification for quality improvement.
Troubleshooting
Technical Features
