8
9
• Do not operate any product with a damaged cord or plug or operate
it after the appliance malfunctions or has been damaged in any
manner.
• Do not let the power cord come in contact with hot surfaces.
• To electrically disconnect the product, turn OFF the product, then
remove the electrical power plug from the outlet.
• Do not use this product for other than intended use.
• This SÉURA product is only intended for use indoors.
• This SÉURA product is not waterproof. Do not immerse this
product in water and/or expose to dripping or splashing water as
this could cause an electrical hazard.
• Retain this manual in a safe place for future reference.
WARNING
• Do not handle or remove your television mirror from the
packaging until it is ready to be installed.
• To avoid damage to the television mirror, only transport it in a
vertical position.
• It is highly recommended that at least three (3) persons assist
in the installation of the television mirror.
• Mirror suction cups are not recommended for use in the
installation of your television mirror.
NOTE:
All SÉURA drawing packages indicate generalized nominal
residential wood framing construction, and are not indicative of
any particular building code. It is the installers responsibility that
all electrical, audio/visual, and framing construction are code
compliant to the municipality in which the product is being installed.
Modifications made to SÉURA’s recommendations are at the sole
discretion of the installer and release SÉURA of all liability.
1. Verify that the rough opening in the wall is built to the provided
specifications.
2. Install mounting brackets.
• Refer to Fastener Packet for detailed mounting instructions.
• Ensure mounting brackets are securely fastened using
wood framing members where possible.
3. Transport product in a vertical position to desired location to avoid
product flex or damage.
4. Connect power supplies and audio/video components.
• It is strongly recommended to test all electrical and
electronic devices to verify proper integration and
functionality before securely mounting it to the wall.
5. Position television mirror close to wall surface and securely engage
mounting brackets.
• Allow for a 1/4” ventilation gap for proper air flow and heat
transfer.
6. Check to ensure the television mirror is fully engaged and secure
to the mounting brackets.
7. Reference the appropriate electronics manual for television mirror
operating instructions.
B A S I C I N S TA L L AT I O N I N S T R U C T I O N S
I M P O R TA N T S A F E T Y P R E C A U T I O N S
( c o n t i n u e d )
