10
Chapter 6 Introduction to work modes
6.1 Methods for wearing
AUTOID
®
wearable ring product is designed to be fastened by hand
strap. Taking the palm-up as an example, the recommended fixed
position is on the first half joint of the left and right hand forefinger
while the scanner exit window faces downward with the button on the
side of the thumb. Make sure bar code scanning can be facilitated
without the activities of the finger affected.
6.2 Bluetooth connection
Bluetooth pairing
1. You can use the traditional Bluetooth pairing, which is to pair the
Bluetooth devices through data capture of Bluetooth search scanner.
2. Use the scanner to scan the specified Bluetooth address bar code for
pairing with the specified device. For example, the wearable ring device
can scan the bar code below to connect the corresponding device. (BT is
followed by a Bluetooth address.)
After the Bluetooth is connected successfully, the scanner LED
