Seuic AUTOID Pad Series, Справочное руководство, Страница: 14 / 95

10
5.4 Cautions for Battery Use

If the battery is exhausted, it is normal that the device may not power on
immediately when plugged in the charger. Please keep charging for a while
before powering on.

The battery can be recharged repeatedly, but the battery is consumable and
should be replaced when the device standby time is significantly reduced.

The charging time of the battery varies according to the temperature conditions
and battery usage, so please charge the battery within a reasonable
temperature.

When the battery is low, the device will pop up a low battery alert. When the
battery charge is too low, the device will automatically turn off.
5.5 LED Indicators

The LED indicators on both sides of the device indicate the battery status and
charging status in different colors.

When NOT connected to USB or the charging adapter or the dock connector,
a flashing red light indicates that the battery is too low and should be charged in
time.

When connected to USB or the charging adapter or the dock connector, a
solid red light indicates that the battery is charging.

When connected to USB or the charging adapter or the dock connector, a
solid green light indicates that the battery is fully charged.

The middle LED indicator on the top left flashes blue (in form of breathing light)
to indicate there is unread message(s), please check it timely.

The left LED indicator on the top left flashes red once when a barcode is scanned,
or does not light up when the barcode is not scanned.
Remarks: the indicator light will not show blue when the system is charging.