Seto ALDEBARAN PROFILINE LED36W, Инструкция по эксплуатации

Страница: 14 / 24

14
ENGLISH
2. Loosen the 4 fixing screws with a screwdriver
3. Pull the housing with screen out of the oppo-
sing end cap
4. Take the screen profile out of the housing
5. Carefully pull the faulty illuminant out of the
frame
6. Take off the silicone ring at the end of the faulty
illuminant and pull it onto the new illuminant
7. Put the new illuminant into the frame (locks in)
Make sure that the silicone ring is located
correctly in the holding bracket.
8. The assembly takes place in reverse order.
ATTENTION!
When assembling, make sure that you do not clamp
or damage any wires!
The replacement of the battery may only be carried
out by the customer support or a trained electrician.
The battery may only be replaced by an original
replacement part. When a device has two batteries,
always use identical batteries with the same charging
state!
WARNING!
When the protective cover is damaged or a faulty
battery is used, there is a risk of fire!
Your product is designed and produced
with high quality materials and com-
ponents that are recyclable and can be
reused. This product is to be disposed of
separately from the household waste. Ple-
ase dispose of the product at your local
collection point or in the recycling centre.
Please help preserving the environment
we live in.
We take care of an eco-friendly disposal of your old
equipment, directly ask the SETOLITE team!
Battery replacement (only models with
battery):
Disposal
Return of old equipment