6. Menu / Operation
38
6.3.11.5 Output options
In the "Output options" menu several functions can be set for the outputs
MV1/2/3, MR1 and LM.
These functions have an influence on the masks and settings in other menu
items.
[x] Outputs active
Switching function in case of metal as set
[ ] Outputs active
No
switching functions in case of metal
No entry in the logbook
"Output OFF" display in the operating mask
[x] Outputs independent
Duration and delay for every output
[ ] Outputs independent
Duration and delay for all outputs
Reset mode [Autom.]
Duration and delay
(metal message is reset automatically)
Reset mode [Manal]
Only delay
(metal message is reset manually)
[x] Metal at fault
Metal message also in case of a fault.
[x] Metal at power on
Metal message until operating status.
Example:
- With
key [x] Outputs active
- With
key [..] Outputs inactive
- Confirm
all
input fields with
to save the settings.
- Press
to cancel the process without making any changes.
6.3.12 Setup
Starting from the operating mask, press the
key to select the Setup menu.
Use the
and
keys to select individual menu
items, and then press
to open the menu item.
Press
to exit the sub-menu and change back to
next higher menu level.
Setup menu
-
Logbook
-
Show counter
-
Device-Info
-
Revision
-
Language*)
-
Login
-
Logout
This input mask is displayed, if the menu level is
password-protected.
Passwords are set by the customer.
Changes in this menu are effective for all products.
Esc
Esc