6. Menu / Operation
34
6.3.8 Auto-Set
- Starting from the operating mask, press the
key in the main menu to
select the Auto-Set menu item.
- This input mask is displayed, if the menu level is password-protected.
Passwords are set by the customer.
This function is used to quickly set the metal detector to the properties of a new product or of the op-
erating environment.
Product memories 1 to 3 have fixed preset product parameters. Auto-Set
only
is possible for product
memories
4
– 10
.
Ensure that only metal-free products are being used.
- Starting from the main mask, press the
key to confirm your selection.
- Press the
key to start the function, then convey the respective product
several times, at least twice.
Press the
key to stop the function. If you continue to convey the product
additional times, this has no influence on the result of the product parame-
ters.
Press the
key to close the function.
- In the Product parameter menu the "Sensitivity" and "Product angle" pa-
rameters can be further optimised manually.
- Use the
and
keys to change the respective parameter, and then
press the
key to confirm the value.
The signal display illustrates how recent changes affect the system’s perfor-
mance.
is now optimised for the product and the environment.
Test the device with a metallic object.