SES SAT2 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 19

SES SAT2 Скачать руководство пользователя страница 5

S A T 2 U S E R / I N S T A L L E R G U I D E V 1 . 4

SAT2 Features, continued.

Stores up to 10 phone numbers

up to 16 digits. Depending on the

programming, SAT2 can dial 2 numbers alternating back and forth 5 times, or ten

different phone numbers one after the other. The combinations (up to 10) will

depend on the programming, and can be easily changed.

The SAT2 has Touch-Tone detection for:

Remotely hanging up the SAT2.

Sending the 4 digit ID number on command.

Remote Touch-Tone Programming.

Acknowledging Call. (Lights the flashing Talk LED).

Ring Detect.

This controls how many rings the SAT2 will receive before it

This is the time from 1 to 99 minutes, in 1 minute increments, that a SAT2

remains connected for talking, before it times out and hangs up.

Acknowledge Tone.

If programmed, will light up the flashing TALK light, after the SAT2 places a

call and the Acknowledge Tone has been received.

Password Control.

The SAT2 has a 4 digit-programming password. This is used for remote

programming from a Touch-Tone phone.

ID Cycle Time.

This is how the SAT2 can automatically send it’s 4 digit ID number. It does

this in 10 second increments.

ID Confirm.

This function, (when programmed to do so), will automatically dial the next

number in it’s memory, if the SAT2 does not send it’s 4 digit ID number.

SAT2 keeps doing this until it does send the ID number, or until it has dialed

all the numbers (up to 10 total) programmed into it.

Ring Down Count Retry.

If used in Ring Down mode, and the called phone does not answer, or the

SAT2 receives a dial tone or busy, will cause the SAT2 to hang up and retry the

call. This is programmable from 1 to 9 retries.

Installers Note

«
...
3
4
5
6
7
...
»

Содержание SAT2




















Отзывы:

Нет отзывов