SES SAT2 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 19

SES SAT2 Скачать руководство пользователя страница 10

S A T 2 U S E R / I N S T A L L E R G U I D E

SAT2 Programming Cont.

How To Change SAT2 Ring Time.

SAT2 can be set to ring from 10 to 90 seconds before it quits trying and hangs up.

Ring Time is in 10 second increments. The factory default Ring Time is 40 seconds.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to

key in 45, a digit from 1 to 9, and

Example: To set the SAT2 Ring Detect from the factory default of 40 seconds to 60

seconds, key in 45 6

How To Set SAT2 Acknowledge tone.

When the SAT2 calls, if an acknowledge tone is pressed by the called party, the green

light will begin flashing. This lets the person using the SAT2 know that the phone call

was received and acknowledged.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to

key in 33, the Touch-Tone number between 1 and 9 and

Example: To set the SAT Acknowledge tone from the factory default of 0 (which is

disabled) to 1 key in 33 1

How To Change SAT2 Password.

SAT2 password comes from the factory as 7777. This number can be any 4 digits.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to
key in 41, 4 digits from 0000 to 9999, and

Example: To set the SAT2 Password from the factory default of 7777 to 1234 (An

incredibly dumb choice), key in 41 1234

You must key in all 4 digits or your password will not change.

Make sure you keep your password recorded and stored safely. If you
forget the password, SAT2 may have to be returned to the factory to be

Installers Note

«
...
8
9
10
11
12
...
»

Содержание SAT2




















Отзывы:

Нет отзывов