Servotronix ServoStudio stepIM, Справочное руководство

Страница: 25 / 49

stepIM Enable | Faults
ServoStudio Reference Manual 25
10.2 Faults
The Faults panel displays a list of all faults and warnings currently in effect, and
a list of faults that have occurred in the present working session.
Figure 10-2. ServoStudio – Fault History
Icon A graphic image that indicates the type of fault: Warning,
Fault, Fatal Fault.
Display Not in use
Fault Name The system name of the fault.
Description Describes the status or fault indicated by the code.
Action Required Describes the recommended steps for correcting the fault.
Faults & Warnings
The Faults and Warnings tab displays a list of all faults and warnings currently
in effect.

Displays a list of warnings .

Displays a list of faults that are preventing the drive from being enabled.
Warnings remain displayed until cleared by Clear Faults button, provided the
condition that caused the warning has been removed.
After a fault condition is removed, the fault remains latched until cleared by any
of the following methods:

Clear Faults button

Software Enable button
Once all faults are cleared, the drive is ready for activation.
Fault History
The Fault History tab displays a list of faults that have occurred since the fault
buffer was last cleared.
The drive stores a log of the 40 most recent faults.
The Clear Faults History button is displayed only when the log contains a fault.