background image

Pulse and Direction Using Single-Ended Signal 

Application Note 

Revision History 

Document 

Revision  

 

Date 

Remarks 

1.0 

Jan. 2013 

Initial release 

 

Firmware 

Revision  

Software (GUI)  

Revision 

1.3.2 

1.3.1.1 

Important Notice  

© 2013 Servotronix Motion Control Ltd.  
All rights reserved. No part of this work may be reproduced or transmitted in any 

form or by any means without prior written permission of Servotronix Motion 

Control Ltd. 

Disclaimer 

The information in this manual was accurate and reliable at the time of its 

release. Servotronix Motion Control Ltd. reserves the right to change the 

specifications of the product described in this manual without notice at any time.  

Trademarks 

All marks in this manual are the property of their respective owners. 

Contact Information 

Servotronix Motion Control Ltd. 

21C Yagia Kapayim Street 

Petach Tikva 49130 Israel 

Tel: +972 (3) 927 3800 

Fax: +972 (3) 922 8075 

Website:

 www.servotronix.com

  

Email: 

[email protected]

 

Customer Service 

Servotronix is committed to delivering quality customer service and support for 

all our products. Our goal is to provide our customers with the information and 

resources so that they are available, without delay, if and when they are needed. 

In order to serve in the most effective way, we recommend that you contact 

your local sales representative for order status and delivery information, product 

information and literature, and application and field technical assistance. If you 

are unable to contact your local sales representative for any reason, please use 

the most relevant of the contact details below: 
For technical support, contact: 

[email protected]

 

To order products, contact: 

[email protected]

 

For all other inquiries regarding CDHD drives or other Servotronix products, 

contact: 

[email protected]

   

Содержание CDHD Series


















Отзывы: