Servomex 07931001B, Руководство оператора

Страница: 15 / 221

07931001B revision 6 © Servomex Group Limited. 2020
1
1. Safety
1.1 General warnings and cautions
If the Laser 3 Plus is used in a manner not specified
within this manual, the protection provided by the
equipment may be impaired.
Failure to observe the requirements of the manual may
result in the user being held responsible for the
consequences and may invalidate any warranty.
Before you attempt to install, commission or use the
Laser 3 Plus, read this manual carefully.
Do not attempt to install, commission, maintain or use
the Laser 3 Plus unless you are trained and competent.
Ensure that Purge Port 3 of the Transmitter Unit,
‘Enclosure Out’, is free to vent to atmosphere before
operation of the instrument.
Ensure that any parts which are removed for the
purposes of installation are retained. They must be
refitted in the event the instrument is transported to
another location.
The Laser 3 Plus does not include any user-serviceable
parts.
The Laser 3 Plus does not include any user replaceable
fuses.
Do not use the Laser 3 Plus as Personal Protective
Equipment (PPE).
If you do not install and use the Laser 3 Plus in
accordance with the instructions in this manual, you may
risk exposure to hazardous laser radiation.
The Laser 3 Plus may be attached to equipment that is
hot. Always wear the appropriate PPE to minimize the
risk of burns.
Where there is a risk associated with the release of
potentially harmful gases into the operating
environment, always use suitable monitoring equipment.
The gases included in the process being monitored may
be toxic, asphyxiant or flammable.
Before you use the Laser 3 Plus, make sure that all
connections are leak-free at full operating pressure to