Servomech ATL 20, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 20

Servomech S.p.A. 02.20-25-28-30-40.E - Rev. 01 Date (M/Y) 05/19 19
8 LUBRICATION
SERVOMECH linear actuators ATL/BSA series are supplied lubricated, with lubricants indicated in the table
below.
ACTUATOR GEARBOX LINEAR DRIVE
ATL 20 Grease (NLGI 0 DIN 51818):
ENI Grease MU EP 0 Grease (NLGI 2 DIN 51818):
ENI Grease SM 2
Also suitable:
SHELL Gadus S2 V220D 2 (NLGI 2)
MOBIL Mobilgrease XHP 222 Special (NLGI 2)
FUCHS Renolit FLM 2 (NLGI 2)
ATL 25 - 28
ATL 30
ATL 40
BSA 20 Grease (NLGI 0 DIN 51818):
ENI Grease MU EP 0 Grease (NLGI 1 DIN 51818):
LUBCON Thermoplex ALN 1001
Also suitable:
FUCHS Renolit AX 2P (NLGI 2)
AGIP Grease AC 1 (NLGI 1)
MOBIL Mobilgrease FM 101 (NLGI 1)
KLUBER Klubersynth UH1 14-151 (NLGI 1)
BSA 25 - 28
BSA 30
BSA 40
Table 8.1 – Lubricants
DO NOT USE LUBRICANTS DIFFERENT FROM THOSE ABOVE MENTIONED.
DO NOT MIX INCOMPATIBLE GREASES.
IF DIFFERENT LUBRICANT SHOULD BE USED, PLEASE CONTACT SERVOMECH BEFORE PROCEED.
IN CASE OF CUSTOM PRODUCT EXECUTION, THE LUBRICANTS COULD BE DIFFERENT FROM THE
STANDARD ABOVE. TO KNOW THE TYPE OF LUBRICANT PLEASE REFER TO THE PRODUCT CHECK
SHEET SUPPLIED WITH THE PRODUCT.
9 MAINTENANCE
9.1 Maintenance of ATL/BSA 20-25-28 actuators

ATL/BSA 20-25-28 actuators are long-life lubricated and do not require any further relubrication.

Every 2 months time interval: visual inspections of actuator conditions, cleaning of dirty parts of the
actuator.

In case of lubricant leakage, contact SERVOMECH.
9.2 Maintenance of ATL/BSA 30-40 actuators

The gearbox is long-life lubricated and will not require any further relubrication.

The linear drive requires periodic relubrication, according to Table 9.1, or at the latest after 1 year of
time. Please use lubricant indicated in Table 8.1 or equivalent.

Every 2 months time interval: visual inspections of actuator conditions, cleaning of dirty parts of the
actuator.

In case of lubricant leakage, contact SERVOMECH.