Operating Manual
Wristwatch-type Receiver
model: SB-HCM-3000N
(Model names may vary by country)
<Button Descriptions>
FUN
(FUNCTION): To start function, To enter chosen function.
PWR
(POWER): Power ON/OFF, To move on to next function, To move on to next number/menu
ESC
(ESC): To delete the calling numbers one by one, To complete/exit function
<Basic Descriptions>
POWER ON:
Press “PWR” button for 3 seconds to turn on the Wristwatch-type Receiver. When power is turned on, the
screen will show “333 222 111 000” with a short beeping sound and vibration. The backlight is shortly turned on and off.
Now the screen is on the stand-by status.
POWER OFF:
Press “PWR” button for 3 seconds to turn it off.
CHARGING:
GREEN: Plug in the adapter and the LED light on the adapter will turn on green.
RED: As the USB cable is connected to the Wristwatch-type Receiver, the LED light turns into red which
means the receiver is in the charging status.
GREEN: When the receiver is fully charged, the LED light turns into green.
* After fully charged, the battery will maintain approximately 40 hours on a stand-by status till the next charging.
BACKLIGHT:
Backlight is on for 2 seconds and then goes off at the moment the Wristwatch-type Receiver gets the
signal or the Function buttons are performed.
BATTERY CHECK & BELL TEST:
Press “ESC” button for 3 seconds on Stand by Mode, then “rF###” will appear.
###: Voltage indication
Push the buttons on Wireless Service Bell. It’s normal if rF blinks on display making a beeping sound. press “ESC” to
exit the function.
* Using this Bell Test Mode, you can test the Wireless Service Bells without registering them on receivers.
BATTERY ALARM:
When the battery is low, melody will be played and the battery icon will blink.
RESET:
The first thing you have to do is resetting SB-HCM-3000N before performing any function.
(Go to Function F6 (bdE))
* After the reset (“dEL”), everything turns into the basic settings. So you have to change them according to your needs.
<Main Features>
1.
Dimensions: 42mm X 57mm X 15 mm
2.
Frequency: 433.92MHz
3.
Power: DC3.7V/180mA
4.
Battery: Lithium Polymer (Internal)
5.
Receive Sensitivity: -105dBm
6.
Expected Battery Life: 40 hours standby
7.
Internal Battery
8.
Internal Antenna
9.
Backlight LED Blue
10.
3 signals, 3-digit display
11.
Multiple Bell registration with same number is possible.
12.
The standard type of cable (Micro USB) is offered.
13.
Priority Numbers: U00~U06
14.
Cancel Numbers: U07, U08, U09
Basic Settings
F2 (bEL):
4
F3 (dSP):
5
F4 (bno):
1
Beep Sound: melody and vibration
Display Time: 5 SEC
Beep Number: 1 TIME
