Quick Reference Sheet
Applicable models: SL-271-P/SL-271-C
Quick Reference Sheet
Notes:
1. Note that (
x)
denotes a number key for the selected port number (x = 1 ~ 2). Currently only the top row number keys are available for hotkeys. Do not use the number pad for hotkey commands.
2. When the binding of PC & Audio/Mic port switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and Audio/Mic switching are bound together. To remove this binding, hit ScrLk + ScrLk + W.
3. Normally, you should have no problem with mouse hot-plugging on a Plug-and-Play OS. However, a non-PnP OS only performs hardware detection while booting up--that is why hot-plugging sometimes
will see a mouse lock…..
Mouse Troubleshooting:
SL-271-P User: If you experience mouse lock when hot-plugging mouse on a non-PnP OS such as Linux or WinNT 4.0, just hit one of the following hotkey commands for mouse reset according to your mouse
configuration on the non-PnP OS --
ScrLk + ScrLk + M + 1
for a 2-key mouse setting;
ScrLk + ScrLk + M + 2
for a 3-key wheel mouse setting;
ScrLk + ScrLk + M + 3
for a 5-key wheel mouse setting.
LED information:
for USB interface – a flashing LED indicates no connection (i.e. no power input from that specific PC port) or the USB device has not been detected on that port; for PS/2 interface – a flashing
LED indicates no connection (no power input form that port).
Hotkey convention:
The hotkey notation
ScrLk + ScrLk + (key)
, denotes that you should hit the individual key consecutively one at a time, not simultaneously.
ServerLink Star w/ Audio&Mic Operation Commands for Hotkeys/ Front-Panel Button
Command
Hotkeys
Front-panel Button
Description
Select PC Channel
(Joint-select PC port and Audio/Mic port, if
binding is enabled)
2
ScrLk + ScrLk + (x)
1
(x is a top-row number key)
x = 1 ~ 2 for PC channel no
--
Select the active PC channel
(Joint-select PC & Audio port, if binding is enabled)
Select Audio/Mic Channel
ScrLk + ScrLk + (Fx)
(Fx is a function key)
x = 1 ~ 2 for Audio mic channel no
--
Select the active Audio/Mic channel
(Joint-select PC & Audio port, if binding is enabled)
Bind PC & Audio/Mic Switching
ScrLk + ScrLk + Q
--
Enable the binding of PC port and Audio/Mic port
switching. (factory default)
Unbind PC & Audio/Mic
Switching
ScrLk + ScrLk + W
--
Disable the binding of PC port and Audio/Mic port
switching
(Once unbound, PC and Audio switching become
independent)
Next lower PC channel
(Joint-select PC port and Audio/Mic port, if
binding is enabled)
2
ScrLk + ScrLk + (arrow up)
--
Select the next lower PC channel
(joint-select PC port and Audio/Mic port, if binding is
enabled)
Next higher PC channel
(Joint-select PC port and Audio/Mic port, if
binding is enabled)
2
ScrLk + ScrLk +
(arrow down)
Press the front-panel button to
switch to next PC channel
Select the next higher PC channel
(joint-select PC port and Audio/Mic port, if binding is
enabled)
Console Mouse/Keyboard Reset
3
[Only for SL-271-P]
ScrLk + ScrLk + End
--
Reset mouse/keyboard on the console side
(This hotkey command works only for PnP OS such as
Windows 98 SE or later Windows OS; for non-PnP OS,
see Note 3 )
Autoscan
ScrLk + ScrLk + S
--
Autoscan through every connected channel for quick
screen browsing of each channel (scan delay = 5 sec.)
Stop Autoscan
Press any key on keyboard
Press the front-panel button
Terminate Autoscan activity
Rev. 1.6 Copyright© All rights reserved. Feb, 2004
