Server Technology switched pro2 Скачать руководство пользователя

Страница: 245 / 255

PRO2 User Guide

Appendix A: Hardware Items

•

245

Behavior/Indicator

Description

Comments/User Action

“

” (flashing double dashes)

Occurs during normal boots, restarts, and firmware
flash updates but should revert to displaying
amperage values upon completion.
Internal communication bus error is indicated if
behavior is endless.

If the behavior is endless, contact Server
Technology Technical Support at:
1-800-835-1515 or

[email protected]

(flashing amperage value)

The current exceeds user-

defined “high load”

threshold (default setting is 80% of maximum input
feed capacity).

Unit blinks a half-second on, half-second off.

“bE”

Breaker Error.
The PDU has detected an error with the circuit-
breaker Branch Circuit Protection.

Display alternates between showing
amperage value for two seconds and flashing

“bE” three times.

Check to see if the breaker was tripped.

“FE”

Fuse Error.
The PDU has detected an error with the fused Branch
Circuit Protection.

Display alternates between showing
amperage value for two seconds and flashing

“FE” three times.

Check to see if the fuse was blown or
removed.

“oL” (flashing)

Overload.

Current exceeds the input feed capacity.

“UA”, “Ub”, “UC”, “Ud”

Occurs when you select the

Configuration > Units >

Identify

option.

Not an error code; no user action required.
Display alternates between showing
amperage value for two seconds and flashing

“UA”, “Ub”, “UC”, or “Ud” three times.

If unit is a master, “UA” (unit A) flashes.

If unit is one of up-to-three possible link

types, these indicators flash: “Ub” (unit B),
“UC” (unit C), or “Ud” (unit D).

Содержание switched pro2
































































































































































































































































Результаты поиска

Содержание switched pro2

Отзывы:

Похожие инструкции для switched pro2

Бренды по названию

Популярные бренды

Server Technology switched pro2, Руководство пользователя

Результаты поиска

Содержание switched pro2

Отзывы:

Похожие инструкции для switched pro2

Бренды по названию

Популярные бренды