SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD
- 21 -
4.5 Installation environment
Before installation, make sure that the installation environment meets
the following requirements
：
•
Energy storage cabinet can be installed indoors or outdoors
；
•
Installation position will not shake
；
•
Environment temperature: 0 ~ 55
℃；
•
The installation position shall be convenient for maintenance
；
•
The energy storage cabinet needs to be installed on the flat
ground, the ground flatness is
≤±
5mm, and the ground bearing
capacity is required to be
≥
1350kg / m2
；
•
No corrosive gas around
；
•
No over wet and high temperature environment
；
•
Non dusty environment
；
•
It meets the fire protection requirements
The cooling mode of the battery compartment of the energy storage
cabinet is forced air cooling. There are air outlets between each layer
of battery pack to ensure the temperature of the battery
compartment from the top to the bottom is uniform. Louvers are
installed at the front and back of the electric bin of the energy storage
cabinet, and cooling fans are installed at the back to ensure the
continuous cooling of the electric bin when necessary. The specific
way of heat dissipation is to let out the air after the forward wind. The
required cold air is drawn in through the mesh at the front door of the
cabinet, and the hot air after heat absorption is discharged through
the mesh at the back door of the cabinet.
In order to ensure the air intake, please install according to the
installation space requirements of section 3.1.5, so as to reserve
proper space for the air conditioner's external circulation in and out. If
it is installed in the machine room, the machine room needs to have a
cooling fan to ensure energy storage
The heat emitted by the cabinet can be discharged from the outside of
the machine room.
