Configuration Doc for HHP Scanner (Model 4820 Cordless)
1/1
HHP 4820 Cordless Scanner with ScanReader Flow / SerialMagic
Scanner Setup
The first step is to configure the HHP 4820 scanner
to be in the proper mode,
with the correct parameters to work with ScanChamp ScanReader Flow (and SerialMagic).
out the following barcodes (pgs. 1-2 of this document), and scan them in order.
Once the scanner has been configured, see the section on setting up ScanReader Flow.
These codes can also be found in the
HHP 4820 Configuration Guide
.
Follow this guide to setup an
HHP 4820 Cordless Bluetooth Scanner
with
ScanChamp ScanReader Flow
software, or
SerialMagic Professional
software.
This document contains specific instructions for the HHP 4820 Bluetooth model,
to be configured for ScanChamp ScanReader Flow on Windows.
Other HHP models should also work, using similar configuration.
Note that although this document is directed to using the scanner on Windows,
You can use SerialMagic Professional on other platforms with the same result.
HHP Bluetooth scanners should also work with SerialMagic Pro on
Windows Mobile (Pocket-PC), BlackBerry, Windows, and Mac OSX.
