5
Water flow adjustor
9.
Once the water starts flowing, add more water to the water reservoir as needed to ensure
that the water pump remains submerged.
10.
If you would like to adjust the flow of the water, turn the flow adjusting dial on the water
pump.
Care and maintenance
•
Keep water clean and free from debris. If debris gets caught in the pump, disconnect it
from any power sources and rinse the pump under clean running water.
•
Clean the water feature periodically to prevent build-up of mineral deposits on the sides
and base. Use a stiff brush and clean warm water with a little liquid soap. Do not use
detergents or abrasives as this will damage the surface of your water feature.
•
Frost can cause damage to the pump. The pump must be removed and stored in a frost-
free environment if the water is likely to freeze.