4
LED light power cable
Assembly
1.
Position on a flat, level surface.
2.
Feed the water tube into the circular hole at the back of the water feature so that it
comes into the water reservoir at the front of the water feature.
3.
Connect the water tube to the water pump.
4.
Connect all of the LED cables as below.
5.
Connect the LED light cable to the plug adaptor.
6.
Position the water pump inside the water reservoir, secure it to the base of the water
reservoir using the suckers to prevent the pump from moving around.
7.
Fill the water reservoir with clean, cold tap water, ensuring that the water pump is fully
submerged.
8.
Connect the pump cable to the adaptor plug then plug into a suitable power supply and
switch it on.