6
•
SPA MASSAGE
• Place the massager on steady surface, the special rubber legs will prevent
the device from sliding.
• Ensure that the unit is unplugged before filling with water.
• Prior to turning the device ON, pour water in the tub. Fill the foot spa
massager with cool or warm water. Do not pour the water over the
maximum level mark indicated in the inner wall of the tub.
• Select one of three massage attachments and place it in the center of the
massager.
• Push the power button ON, ensure no leaking in the tub.
• Feel the water temperature firstly by hand before placing in your feet.
• Sit down on chair or other safe place, and place your feet in the spa
massager.
• Push the function buttons of your choice to start the massage function.
• Choose the vibration button to stimulate feet muscles.
The acupressure rollers are designed according to the foot reflexology
points, and it can eliminate your fatigue.
SAFE FOOT-SPA:
FIRSTLY POUR ENOUGH WATER (HIGHER THAN THE
LOWEST WATER LINE, LOWER THAN THE HIGHEST WATER LINE), SECONDLY
PLUG THE DEVICE IN THE SOCKET, PUSH THE POWER BUTTON.
THEN MAKE SURE THERE IS NO LEAKAGE OF WATER FROM THE TUB.
FINALLY PUT YOUR FEET INSIDE THE TUB TO ENJOY FOOT SPA MASSAGE.
WARM WATER SPA, VIBRATION & BUBBLE MASSAGE
Bubble function will increase Oxygen to clean your feet. Vibration function
promotes blood circulation.
If you are pouring cold water, you should wait until the water warms up to a
suitable temperature. The heating element will keep the water warm during
the whole massage process. Just relax yourself to enjoy the spa massage
process.
www.SerenLifeHome.com
Содержание SLFTSP18
Страница 9: ......
