www.SereleneLifeHome.com
WHAT'S IN THE BOX:
•
Repair Stand Base Assembly
•
Top Tube Assembly
•
Clamping Assembly
•
Hand Knob
•
Flange Lock Nut M6
•
Hard Stop
ASSEMBLY INSTRUCTIONS
Step 1
• Line the Hard Stop (#F) up with the two holes in the Large
Vertical Upright (#A) such that the arrow on the Hard Stop
(#F) is pointing upward. Using a 3mm hex wrench, insert
the M5 x 12mm Screws (#K.a) into the holes in the Hard
Stop (#F) and screw them into the Large Vertical Upright
(#A). Tighten to 3. 5Nm max (Do Not Overtighten)
SLBKRS3
Home Mechanic Bicycle Repair Stand
Height Adjustable with Upgraded Collar and Leg Supports, Holds Up to 80 lbs.
•
Coped Washer
•
Leg Washer M6
•
Button Head Cap Screw (M5x12mm and M6x60mm)
•
Hex Tool ( 3mm and 4mm)
•
10mm Flat Wrench Tool
A.
Repair Stand Base Assembly
B.
Top Tube Assembly
C.
Clamping Assembly
D.
Hand Knobs
E.
Flange Lock Nut
F.
Hard Stop
G.
Coped Washer
H.
Leg Washer
I.
2 Lock Nuts
J.
Flat Wrench Tool
K.
Button Head Cap Screw
a.
M5x12mm
b.
M6x60mm
L.
Hex Tool
a.
3mm
b.
4mm
