Serene S2068
2
Bathroom Fan Heater
Introduction
Designed for easy installation, your Serene S2066 - S2068 Metal Bathroom Fan Heater includes a
clip- on wall mount bracket for faster and easier installation. This model S2068 bathroom fan heater
has been designed to cover the footprint of previously available SERENE and SKOPE models
Safety Information
•
When using any electrical appliance, safety precautions should always be observed. Read these
instructions carefully and retain for future reference. For service, contact your nearest
authorised service agent.
•
When used by, or near young children or infirm persons, close supervision is necessary.
Young children should be supervised to ensure that they do not play with the appliance.
•
Do NOT use this appliance other than for its intended use.
•
Use this appliance with the voltage specified on the rating label.
•
Be very careful not to touch hot surfaces or moving parts.
•
Do NOT cover the grilles or place any object or material up against the unit as this may block
the entry or exhaust of airflow.
•
Do NOT probe any opening to remove fluff. To ensure trouble-free performance, it is
recommended that the unit be isolated from the power supply and a vacuum cleaner used to
remove dust and fluff from the inlet and outlet grilles on a regular basis.
•
Regulations require that electrical work be carried out by authorised persons. For your
own safety and that of others, ensure this is done.
•
Do NOT allow the supply cord to come into contact with heated surfaces during operation.
•
If the supply cord becomes damaged, it must be replaced by a qualified person in order to
avoid a hazard.
Installation
This appliance MUST be installed in accordance with relevant
wiring rules and regulations which cover installation of appliances
and accessories in damp situations, such as bathrooms, showers,
laundries and other areas with fixed water containers (in
Australia and New Zealand - AS/NZS 3000:2000 Wiring Rules).
Distances
The heater must be mounted a minimum distance of:
•
1800mm from floor level
•
200mmm below the ceiling
•
250mm from adjacent walls
Important:
The heater must NOT be located immediately below a socket outlet or within reach of a bath
or shower.