Serene centralalert CA-CX, Руководство пользователя, Страница: 18 / 21

OGM operation from remote control phone
In remote control operation main menu, you can record a new OGM
from remote control phone by pressing “6”. The machine will
announce “Please speak after the tone”, “To end recording, press
Hash”. After the recording it will announce “to listen to the main
press 1”.
.
1.
menu,
3.
4.
Once “#” is pressed, it will play the security code, “Your security
code is XXXX”, then announces “To listen to the main menu, press 1”
4 digits can be entered for security code.
If no key input within 8 seconds, the machine will say “to listen to
the main menu, press 1”
Default OGM and announcement can not be erased
Set answer machine mode from remote control phone
In remote control operation main menu, you can change answer
machine mode as following:
Press “5” to set answer on/off, it announces “Answer on” or
“Answer off”
During recorded OGM playback, pressing “4” can erase OGM, a
long beep tone to confirm OGM deleted and then play the default
OGM.
Set security code from remote control phone
In remote control operation main menu, press “9” to set a new
security code for your answer machine. The machine will say “To
set a new security code, press *”, “To listen to your security code,
press #”
Once “*” is pressed, it will say “Please enter your new security
code after the tone”; 4 digits can be entered from the keypad; After
you enter new security code, it will say “Your security code is XXXX”,
then the machine will say“To listen to the main menu, press 1”.
1.
1.
2.
1.
2.
-32-
-33-
“You have no new messages”
“To listen to the main menu,press 1”
when you press 1,the following voice
prompts will be announced:
“to play new messages,press 2”
“ ”
“
to play new messages,press 3
to delete messages,press 4”
“to set answer on or off,press 5”
“to record a new outgoing message,press 6”
“to listen to the main menu again,press 1”
>> if no key input within eight seconds,the remote operation
will be canceled and hangs up the line.
>> pressing “ ”key on the machine or picking up parallel
hpone will stop theremote operation.
message operation form remote control phone
>> at remote control opration main menu,the following
procedure can be done:
>> if there are new messages,the machine will immediately
play the new messages. it will say “you have X new
messages,new message one”.
>> if there are no messages,it will announce“you have no
messages”,the machine will announce“to listen to the main
menu,press 1”.
>> after finish playback fo the last message,it will announce“end
of ,messages,to delete all messages press 4”then beeps followed
by“you have no messages”
>> during message playback,the following can be done:
>> press “1”to play previous message
>> press“2”to play next message;
>> press“3”to play again the message;
>> press“4”to delete the current message,it will announce
“message deleted”and plays the next message;
>> you have 120 seconds to record your message.after 120
seconds,along beeptone will be played and the message
will be saved as new message;the machine will go to main menu.
2. During recorded OGM playback, pressing “0” can erase OGM, a
long beep tone to confirm OGM deleted and then play the default
OGM.