15. Attach draft pads
. Bottom of pad should be level with dock floor. Attach to inside of side frame with
aluminum angle over fabric flap using TEK screws in two locations. Insure snug fit of draft pad to frame.
16. Caulk shelter head and side members at wall
around the outside edges. Caulk between truck
shelter and wiper seal head frames and across front of wiper seal head frame behind stop plate. A
silicone caulk (supplied by others) is recommended.
IMPORTANT !
INSTALLATION OF HEAD CURTAIN WIND STRAPS OR SIDE CURTAIN RETENTION STRAPS
UNDER TENSION WILL RESULT IN SEVERE HEAD AND SIDE CURTAIN DAMAGE. UNDER NO
CIRCUMSTANCES SHOULD ANY WIND STRAP OR RETENTION STRAP IN THIS SYSTEM BE
STRETCHED BEFORE FINAL ATTACHMENT TO SHELTER.
