Sercel GRC DATA PRO, Руководство по эксплуатации, Страница: 20 / 93

Data Pro P/N 10029355 Rev AE
Operation Manual Page 20 of 92
7.0 Main Menu
The Main Menu screen allows the user to access six customer applications:

Logging

Modbus Setup

Peripherals

About

Interface Setup

System
7.1 Logging
All the device and peripheral data is stored on internal memory. The user can export the stored data to
the removable USB memory stick through the front USB drive port.
The ‘
Memory Logging
’
screen displays the following information/functions (
see
Figure
14
):
1. Timestamp when the system first starts logging.
2. Timestamp when the system was working last.
3. Elapsed time represents the length of time the system has been logging.
4. The storage used.
5. The system log files occupy the memory space (not for end user, mainly used for program
validation).
6. The data storage space available on the internal memory ( Available memory is shown on the main
screen as a percentage of internal memory)
7. The space left for program memory (not for end user, mainly used for program memory check).
8. The time left on the internal memory before it is full is automatically calculated by the application
based upon set sample rate and all parameters logged.
9. Delete all the data files, event files, and analog files.
10. The internal log data exports to the USB memory stick via the front panel USB port.
11. The system log and binary files can be copied to the USB memory stick then sent to GRC for
analysis or troubleshooting assistance