DA
L
19
65
Pag. 5/6
9- Put the motor in the metal box again and insert the connecting rod between the motor and the pivoting bracket.
ATTENTION:
Periodically check the fixing of the 4 self locking nuts.
!
!
10- The position of the slide depends on the position of the motor and the opening angle of the gate. Therefore
temporarily place the guide slide on the gate and make a complete manual manoeuvre of opening and closing,
verifying that the bearing of the arm glides inside the guide slide without ever hitting the ends
11- After this check, permanently fix the guide slide.
M
C
/5
C
I
E
Before permanently fixing the guide
slide, verify with a manual
manoeuvre that the bearing does
not hit the ends
!
IMPORTANT:
GREASE THE PIVOT
BEFORE FITTING THE
LEVER GROUP
EMERGENCY MANOEUVRE IN CASE OF BLACK OUT
