Sequoia LISST-200X, Руководство пользователя

Страница: 40 / 112

LISST-200X Operation Details 32 LISST-
200X User’s Manual
4.
Configuring Data Collection
The LISST-200X software can be used to configure the Start and Stop Conditions, Fixed
Rate or Burst sampling and sample rates.
STEP ACTION RESULT
1
•
Connect the instrument to the computer and establish
communication in the LISST-200X program (page 28).
Software open,
communicating
with LISST-200X.
2
•
Open the Sampling Programs window by choosing
Instrument Configuration from the home page.
•
Certain instruments can compute the PSD onboard in real
time. If your instrument has this feature, an additional
configuration ‘Data Output’ will appear on this page. (See
Autonomous Real-time Data Processing on page 52 for
more information).
•
To set the LISST-200X data logger clock to the computer
clock, open the status bar, click the wrench icon, and select
‘Set Instrument Clock’.
•
You can also zero the depth sensor from this same menu.
Instrument Status
Displayed.
Clock set
3
•
By selecting the Sampling Schedule Tab at the top of the
main window the screen below appears. This screen is
used to set the type of sampling: Fixed Rate or Burst. You
can also select the samples per average and sample rates
on this screen.
Operating Mode
set