Before importing data from
stlc
files, make sure the following conditions
are fulfilled:
•
The S/DTDR-65 is properly calibrated (green
TTC
LEDs).
•
A reference measurement with
connected TDR-probe
is available (yel-
low LED turned on).
•
If two devices are connected simultaneously to the software,
TTC
and
reference measurements for both devices must be available.
Remark 1:
before importing the STLC data the software asks whether single-ended
and/or differential lines shall be imported. In case only one device is connected it
may be advantageous to measure single-ended and differential separately by gen-
erating two individual macro lists
Remark 2:
if the settings like ”Customer”, ”Part Descr.”, ”Part Nmb.”, ”Batch Nmb.”,
and ”Material” (see section
) are not defined in the imported STLC-file, the
settings are chosen from the currently active sample.
9.4 CIF-Import Module (optional, not for DTDR-800)
For information about this module please contact
77