5.5 Status Indicators for TTC & 12TC
In the left-lower corner of the
Main Window
the TTC status indicator LEDs
are located (see section
). The meanings of the colors of the LEDs are
described in the table below.
Please note:
a further LED displays whether a reference measurement has been
performed (yellow) or not (grey). This can be used to set the reference plane for the
spatial x-axis in (D)TDR- or impedance measurements. See section
for further
information.
LED 1, 2, and 3 grey :
TTC/12TC not applicable/activated
LED 1, 2, or 3 red :
no TTC/12TC activated
LED 1 green :
TTC for channel 1 active
LED 1 and 2 green :
DTTC for channel 1 and 2 active
LED 1, 2, and 3 green :
12TC active
Timestamp:
date and time of TTC/12TC measurements
43