Sepura SC21 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 41

Sepura SC21 Series Скачать руководство пользователя страница 8

Model information

This document applies to the following SC21 Series hand-portable radio models:

SC2120 (380 - 430MHz)

SC2124 (403 - 470MHz)

SC2128 (806 - 870MHz)

The radio has a product label located in the battery compartment. The label contains important
information such as the product serial number, TEI number and the country of manufacture.

There are two boxes on the left-hand side that may display an update to the hardware (Mod State)
and software compatibility number since the product was manufactured.

Serial No. 1PR011710GWF100

SC2120

TEI: 00036965739000

Variant: TH01STW

QC: 000000000

Made in the EU

Rework mod state

Rework software
compatibility no.

QC number

QC numbering system

The 9 QC number on the label includes the hardware modification state and software compatibility
number.

Character no.

QC:

4

8

Mod State no.

Software compatibility no.

X X X 6 X X X 0 1

Hardware modifications

The hardware modifications are included in the QC number. The product has had the following
modifications since the start of manufacture:

Mod State

Description

Date

0

Initial Mod State

03/2017

1

sDAC connection stability

10/2017

2

SC21 Series hand-portable radio

«
...
6
7
8
9
10
...
»

Содержание SC21 Series










































Отзывы:

Нет отзывов