_______________________________________________________________________ 1 PolaRxS_PRO
PolaRxS Product Family Hardware Manual v1.3.0
13
Ethernet cable (crossed) to be connected to the ETH connector.
Cable Name: CBLe_PWR_OE
Part #:
200422
Open-ended cable for the PWR connector (see pinout in section 1.2.8).
Pin#
Wire Color
1
Blue and green (these two wires are both connected to Pin#1)
2
Red
3
Black and Purple (these two wires are both connected to Pin#3)
1.6
Internal Logging on SD Memory Card
The receiver incorporates a SD memory card for internal logging. Refer to the “How-to…” section of
the Firmware User Manual to learn how to use this feature.
To prevent data corruption, logging is protected against accidental power outages. There is no need to
unmount the SD memory card before switching off the receiver.
1.7
Applicable Software Package
The PolaRxS_PRO is compatible with Septentrio’s SSRC3 Software Packages.
1.8
Hardware Specifications
Power consumption:
Nominal operation: 6.5W typical
During initial OCXO warm-up: up to 10W.
Receiver switched off (i.e. POWERLED not lit): 1.6W typical. This is
because the internal OCXO remains powered even when the power button is
in the “off” state.
Size:
284 x 140 x 37 mm (length including connectors)
Temperature Range:
-40 to +60 °C (operational)
-55 to +85 °C (storage)
Ingress Protection:
IP65
Shock:
MIL-STD-810F, 516.5
Vibration:
MIL-STD-810F, 514.5
