3 Command Line Reference
sst
gst
setSatelliteTracking
getSatelliteTracking
Satellite
none
+ G01 ... G32
+ R01 ... R30
+ E01 ... E36
+ S120 ... S158
+ C01 ... C63
+ J01 ... J07
+ I01 ... I14
+ GPS
+ GLONASS
+ GALILEO
+ SBAS
+ BEIDOU
+ QZSS
+ NAVIC
all
RxControl: Navigation > Advanced User Settings > Tracking > Satellite Tracking
Use these commands to define/inquire which satellites are allowed to be tracked by the re-
ceiver. It is possible to enable or disable a single satellite (e.g.
G01
for GPS PRN1), or a whole
constellation.
Gxx
,
Exx
,
Rxx
,
Cxx
,
Ixx
,
Jxx
and
Sxxx
refer to a GPS, Galileo, GLONASS,
BeiDou, NavIC/IRNSS, QZSS or SBAS satellite respectively. GLONASS satellites must be refer-
enced by their slot number in this command.
For a satellite to be effectively tracked by the receiver, make sure that at least one of its signals
is enabled in the
command.
A satellite which is disabled by this command is not considered anymore in the automatic
channel allocation mechanism, but it can still be forced to a given channel, and tracked, using
the
command.
Tracking a satellite does not automatically mean that the satellite will be included in the
PVT computation. The inclusion of a satellite in the PVT computation is controlled by the
command.
Examples
To only enable the tracking of GPS satellites, use:
COM1>
sst, GPS <CR>
$R: sst, GPS
SatelliteTracking, G01+G02+G03+G04+G05+G06+G07+G08+G09+G10+G11
+G12+G13+G14+G15+G16+G17+G18+G19+G20+G21+G22+G23+G24+G25+G26+G27
+G28+G29+G30+G31+G32
COM1>
To add all SBAS satellites in the list of satellites to be tracked, use:
COM1>
sst, +SBAS <CR>
$R: sst, +SBAS
SatelliteTracking, G01+G02+G03+G04+G05+G06+G07+G08+G09+G10+G11
+G12+G13+G14+G15+G16+G17+G18+G19+G20+G21+G22+G23+G24+G25+G26+G27
...
COM1>
111
Содержание PolaRx5TR
