SEON Trooper TL2, Руководство по установке

Страница: 29 / 84

DVR Setup
700-0099 R008 2–13
2.3. vMax Web Laptop Configuration
The TL DVR can be managed using vMax Web using Internet Explorer (32 bit version
only) with the laptop connected to the DVR using an RJ-45 Ethernet cable.
Make sure the DVR and other system components are already installed and configured
in order to access the DVR via vMax Web.
Configure your laptop to obtain IP addresses automatically, using DHCP (Dynamic Host
Configuration Protocol). If it is not configured to DHCP, or you need to verify the
setting, then follow these steps to configure your laptop.
To configure your laptop:
1. Navigate to Windows Local Area Connection properties in Windows 7 or XP as
follows:
Windows 7
: click Start > Control Panel > Network and Internet > Network and
Sharing > Local Area Connection.
Windows XP
: click Start > Control Panel > Network Connections > Local Area
Connection.
The Local Area Connection Status window appears.
2. In the Local Area Connection Status window, click on Properties.
Figure 2-20 Local Area Connection Status window