Rear Vision System (TL-HD DVR) Installation Guide
© Seon Design Inc. | July 2014 | All rights reserved. www.seon.com. Part Number: 700-1033 R003
Introduction
The Rear Vision System (RVM-TLHD) for vehicles enables the driver to see the camera output on a dash mount monitor whenever the
reverse signal is triggered.
When installed, the Rear Vision System operates as follows:
•
The monitor will usually be OFF (dark)
The monitor will only turn ON when the bus is put into reverse gear (REVERSE signal is applied to the RVM)
The RVM-TLHD is installed using a TL-HD DVR camera socket, so the camera video goes through the DVR before displaying on the
monitor. RVM-TLHD video, events, and alarms are recorded.
RVS Installation Components
4
Select Monitor Settings, and set the Default Display DVR
menu option to the video channel displaying the RVS camera
video.
The display switch should be OFF (default setting).
5
Click BACK to save changes in the menus.
6
Click Diagnostic Display and, in the menu, turn off the
diagnostic information (Voltage, HDD etc.) so it will not
display on the rear view monitor.
The Status, Version, Speed, and camera name overlay text
will still display.
7
Exit the DVR menu.
8
Reboot the DVR and test the monitor view with the vehicle in
reverse.
9
Disconnect the diagnostic monitor and mouse.
LCD Monitor Configuration
To setup the monitor to automatically power on when the reverse
signal is triggered, see the monitor kit 080-0171 installation guide.
Monitor Mirror/Reverse Display
Mode
To setup the monitor to display in mirror mode, see the monitor kit
080-0171 installation guide.
Warranty
Seon Design Inc. (Seon) warrants the cameras and components
listed below against defects in workmanship and materials provided
that such defects appear or are discovered within the respective
periods specified below and provided further that the purchaser of
such products notifies Seon of such defects within thirty (30) days
of the appearance or discovery of such defects:
•
Three (3) years from date of purchase, parts and repair
labor on all Cameras
•
Three (3) years from date of purchase, parts and repair
labor on the Explorer® Premier, DX, TX, EX, MX, and
Trooper® TL series mobile DVR Systems
•
Three (3) years from date of purchase, parts and repair
labor on all storage media (including hard drives)
•
One (1) year from date of purchase, parts and repair labor
on the Smart Reach® Wireless systems and other Wireless
products
•
One (1) year from date of purchase, parts and repair labor
on the VML Controller, Student Tracking RFID reader, and
other vMax Live Plus hardware products
•
One (1) year from date of purchase, parts and repair labor
on all other products and accessories
All service/replacement parts and repairs are warranted for a period
of 90 days. For full warranty information, go to www.seon.com.
Seon Contact Information
•
Toll free telephone 1-877-630-7366
•
Local telephone 604-941-0880
•
Email: [email protected]
•
Web: www.seon.com
CA or RVC303 camera (optional)
Camera power cable 060-1010
Camera extension cable, HE3 (75’) or HE2 (50’)
DVR video cable 060-0678
Monitor 080-0171
Diode and wiring
Monitor power and connector cable 060-0676
Install guide
TL-HD DVR Expansion harness 060-1014
*700-1033*