Seon Mobile Surveillance Explorer EX4 Plus 35 System, Инструкция по установке и эксплуатации

Страница: 84 / 100

Maintenance and Returning Product for Service
5–2 700-0058 R001
5.1. Maintenance
5.1.1. Cleaning the Lock Box
The EX4 Plus 35 System lock box is made from 18 gauge steel, coated with an
outdoor powder paint and only requires periodic cleaning. To clean the lock box,
use a damp cloth with a mild detergent. Do not allow water into the ventilation
holes on the lock box.
5.1.2. Cleaning the Camera and Window
The camera has a powder painted stainless steel enclosure. To clean the camera
enclosure, use a damp cloth with a mild detergent.
To clean the camera window, use a soft, clean cloth to avoid scratching the
window.
5.1.3. Replacing the Fan Filter
Depending on the operating environment, the fan filter on the back of the DVR
enclosure may need to be changed occasionally. Check the filter monthly for
excess dirt and replace the filter when it restricts airflow. Failure to replace a
blocked filter may result in the DVR shutting down on a hot day due to inadequate
air circulation.
If you need a new fan filter, contact your dealer or Seon Design to obtain a
replacement.
To replace the fan filter:
1. Remove the filter cover by gently prying it off with a small flat screwdriver.
2. Discard the used filter and place a new filter back into the filter holder.
3. Push the filter cover back into the holder and snap it into place.
Figure 5-1 Replacing the fan filter