Seon Mobile Surveillance Explorer EX4 Plus 35 System, Инструкция по установке и эксплуатации

Страница: 37 / 100

Installation
700-0058 R001 2–15
2.10. Step 9: Hardware Installation Final Checklist
Harnesses (Camera, recorder, and accessories)
• Check for proper slack.
• Check that the cables and harnesses are properly secured.
• Check that sharp metal edges are not touching the cables or harnesses.
• Check that all the cables and harnesses are neat and tidy.
• Check that the connections are solid (no shorts).
Cameras
• Check for tight mount.
• Check the internal harness connections.
• Check that the lid is properly seated on the gasket and secured tightly.
• Check camera (s) field of view.
Recorder
• Check for tight mounting of hardware (lock box).
• Confirm that the cable grommet is properly installed.
• Check that all connections are tight.
System
• Install the fuses.
• Plug the video monitor into the DVR.
• Power up the system.
• Confirm that all the cameras and audio sources are operating properly.
• Confirm that all the status indicators react properly.
• Hard drive power indicator
• Hard drive (lock and access)
• Voltage, temperature or system alarms
• Switch to temporary power by pressing the front panel
POWER
button with
vehicle ignition turned OFF.
• Test audio/video record and test audio/video playback.
• Configure the menus per the required end-user specifications.